Samurai 2-Part Paint patented can design allows nozzle and hardener sharing 1 valve. This design eliminates complicated hardener activation steps and paint leaks from the valve at the bottom of the can.
The Single Valve 2-Part Paint
Before we go for time efficiency
We wonder have you ever tried to refurbish your fishing boat and been disappointed with the finish? Marine paints are designed to protect offshore structures that are submerged in salt water. But there's one thing you need to know… not all marine paints are created equal…
1 Valve For 2
Patented Can Design
Samurai patented 1 valve for hardener activator and nozzle can design ensures the activation is hassle-free while delivering professional result with ease.
The Floor Remains Clean
Applying a tape on the broken valve to stop the paint from leaking? You’ll never go through the same thing again.
Unlike the usual 2-Part Paint that has 2 valves, Samurai 2-Part paint eliminates the problem of paint leaking from the valve at the bottom of the can, because the only valve is located at the top of the can. No paint will be dripping out from the bottom and stains the floor!
It saves time and energy!
The marine aerosol paint gives an easier painting procedure:
Wide coverage
Faster application
Less waste
Even coating & finish
No thinner needed
No mixing processes
Samurai Patented 1 Valve Can Design
The perfect mixture
Samurai Marine 2-Part Paint delivers a perfect ratio of mixture, eliminating the biggest hectic of using brush-on and roll-on paint - mixing the optimal ratio of thinner to paint. This guarantees you will get a consistent paint viscosity and even finish every time.
The Floor Remains Clean
Applying a tape on the broken valve to stop the paint from leaking? You’ll never go through the same thing again.
Unlike the usual 2-Part Paint that has 2 valves, Samurai 2-Part paint eliminates the problem of paint leaking from the valve at the bottom of the can, because the only valve is located at the top of the can. No paint will be dripping out from the bottom and stains the floor!
It saves time and energy!
The marine aerosol paint gives an easier painting procedure:
Wide coverage
Faster application
Less waste
- Even coating & finish
No thinner needed
No mixing processes
The perfect mixture
Samurai Patented 1 Valve Can Design
Samurai Marine 2-Part Paint delivers a perfect ratio of mixture, eliminating the biggest hectic of using brush-on and roll-on paint - mixing the optimal ratio of thinner to paint. This guarantees you will get a consistent paint viscosity and even finish every time.
Paint can only be sprayed after hardener activation
Some paints took forever to cure? That’s probably because of the improper ratio of thinner or hardener. With Samurai patented can design, not a single drop of paint can be sprayed out without activating the hardener. You’ll only spray the perfect mixture out of the can, which makes the paint dries fast!
Paint can only be sprayed after hardener activation
Some paints took forever to cure? That’s probably because of the improper ratio of thinner or hardener. With Samurai patented can design, not a single drop of paint can be sprayed out without activating the hardener. You’ll only spray the perfect mixture out of the can, which makes the paint dries fast!
No-skill-required hardener activation
As easy as slam, shake, spray!
Cheaper than other 2-part paint as no topcoat is required
Cheaper than using a spray gun, no equipment is needed
Cheaper than going to a workshop!
We value your experience
Satisfaction Guarantee
Samurai 2-Part Polyurethane Granular Textured Coating and Epoxy Granular Textured Primer are eligible for return under our Satisfaction Guarantee.
In case you receive a product with a clogged nozzle, please raise a refund or replacement request at any time.
If you receive a damaged/different product or one with missing / faulty accessories, you will be given a refund and replacement of the entire product.
Value Bundle
Free Shipping Above $50
Satisfaction Guarantee
Secure checkout
Free Shipping Above $50
Satisfaction Guarantee
Secure checkout
FAQ
What makes Samurai 2-Part Paint different from other brands?
What kind of aerosol paint is Samurai?
Samurai uses NC modified acrylic resin. This NC modified acrylic resin makes Samurai different from all the other brands in the market today, and gives it strength and quality.
Is Samurai Paint product heat resistant?
Samurai Paint products can withstand up to 374°F However, in certain circumstances it could withstand up to, approximately 1,112 °F.
What causes the nozzle clogged?
If the can is not shaken well before use, only the pigment paste at the bottom layer will be sprayed out. As a result, the thick paste will get stuck at the opening of the diptube and will turn hard over time.
What causes bubbles on the painted surface?
Blistering of paint is caused by water, solvent or rust trapped under the surface. You should sand it down to remove the old paint. Make sure the surface is completely clean and dry before repainting and refinish.
What causes fish eyes on the painted surface?
Fish Eyes result from all sorts of dirt such as oil, wax, and dust on the surface which remain on the surface after sanding. To fix this, re-sand the surface with 800 grit sandpaper and wash the surface with soap and water or degreaser to clean all stuck dirt off. Then repeat the steps of painting.
What causes orange peel on the painted surface?
Orange Peeling results from: a spray can that is held too far away from the surface; the temperature where you’re spraying is too high (for best results, spray under 86°F or out of sunlight) or the spray nozzle is clogged. To fix it, sand with 800 grit sandpaper, and use a fine compound to rub out the orange peel. If that fails, remove paint with paint remover and start over the repainting process and refinish.
How can the paint reach hard-to-reach areas?
Every can of samurai 2-Part aerosol paint comes with 2 anti-clogging nozzles. Spiral nozzle is designed to ensure the paint reaches hard-to-reach areas.
Can 2-Part paint be sprayed over 1K paint?
Yes, absolutely. However, 2-part base coat on 2-part primer achieves better results and provides stronger protection.
Can I spray Samurai 2-Part Polyurethane Granular Textured Coating on plastic surface?
Yes, you can spray 2-Part Polyurethane Granular Textured Coating on any plastic surface like bumper, side step and trim.
Can I spray 2-Part Polyurethane Granular Textured Coating on cracked surface?
Yes, you can. However, we suggest applying Samurai 2-Part Epoxy Granular Textured Primer
priorly to promote a smooth finish as it can fill up minor cracks and scratches.
Can I spray Samurai 2-Part Paint over a rusty surface?
Yes, you can spray paint over rust. Before painting, remove the rust properly with sandpaper, clean the surface with water and let the surface dry thoroughly.